Control-Box® Specifications
Material
Control-Box® is manufactured from High Impact Polypropylene with UV protection.
Data
CONTROL-BOX |
|
|
WEIGHT |
STORAGE |
MODULES |
DIMENSIONS (L x W x H) |
CUBIC CAPACITY |
KG (approx) |
LITRES (approx) |
Single Module |
600mm x 600mm x 600mm |
0.216m³ |
9.8 |
206.2 |
4.63 modules |
|
1m³ |
45.45 |
954 |
46.3 modules |
|
10m³ |
454.5 |
9,540 |
463 modules |
|
100m³ |
4,545 |
95,400 |
4,630 modules |
|
1,000m³ |
45,450 |
954,000 |
|
LOAD |
INSTALLATION DEPTH |
|
|
|
Walkable |
Min 0.2m* |
|
|
|
Car |
Min 0.3m* |
|
|
|
B-Double (9t axle) |
Min 0.6m* |
|
|
|
Mobile Crane (12t axle) |
Min 0.7m* |
|
|
|
Maximum top cover (metres) |
2.4 |
|
|
|
Maximum layers |
4 |
|
|
|
Maximum depth (metres) |
3 |
|
|
|
Flow rate |
open design |
|
|
|
Pipe connector - outer diameter (mm) |
110, 160, 200, 315, 500 |
|
|
* Assumptions: Bearing at depth 1H:2V dispersion angle, Ultimate pressure calculations 1.2DL and 1.5LL, soil coefficient 0.35 (1H-one horizontal, 2V-two vertical, DL-soil load, LL-axle load) |
|
Control-Box® Single Piece
|
Single pieces flat packed

|
Control-Box® Endplate
|
Palletised in assembled sections
|
Control-Box® infiltration assembly - fed by an external sump.
|
|

|

|
 Disclaimer: These details offer a guide only to the application and installation of Control-Box® . Ecowaterboxx Pty Ltd recommends that installers of Control-Box® seek professional advice to verify the intended use, positioning and installation procedure are compliant with applicable statutory and engineering requirements. As Ecowaterboxx Pty Ltd has no direct control over the application and installation of Control-Box® , no responsibility is accepted by Ecowaterboxx Pty Ltd and its distributors and agents. Ecowaterboxx Pty Ltd reserves the right to change specifications and design without notice.
|